-40%
(ONE ONLY) LEWMAR 42ST 2 SPEED WAVE-GRIP SELF TAILING WINCH
(ONE ONLY) LEWMAR 42ST 2 SPEED WAVE-GRIP SELF TAILING WINCH
(ONE ONLY) LEWMAR 42ST 2 SPEED WAVE-GRIP SELF TAILING WINCH
(ONE ONLY) LEWMAR 42ST 2 SPEED WAVE-GRIP SELF TAILING WINCH
(ONE ONLY) LEWMAR 42ST 2 SPEED WAVE-GRIP SELF TAILING WINCH
(ONE ONLY) LEWMAR 42ST 2 SPEED WAVE-GRIP SELF TAILING WINCH
(ONE ONLY) LEWMAR 42ST 2 SPEED WAVE-GRIP SELF TAILING WINCH
(ONE ONLY) LEWMAR 42ST 2 SPEED WAVE-GRIP SELF TAILING WINCH
(ONE ONLY) LEWMAR 42ST 2 SPEED WAVE-GRIP SELF TAILING WINCH
(ONE ONLY) LEWMAR 42ST 2 SPEED WAVE-GRIP SELF TAILING WINCH
(ONE ONLY) LEWMAR 42ST 2 SPEED WAVE-GRIP SELF TAILING WINCH
(ONE ONLY) LEWMAR 42ST 2 SPEED WAVE-GRIP SELF TAILING WINCH

(ONE ONLY) LEWMAR 42ST 2 SPEED WAVE-GRIP SELF TAILING WINCH

$ 200.11

Availability: 84 in stock
  • Condition: GOOD USEABLE CONDITION (PLEASE VIEW PHOTOS FOR BEST DESCRIPTION OF CONDITION) A NICE WINCH THAT IS READY TO GO SAILING! THE BASE HAS SHIPPING DAMAGE (A CRACK) BUT THE DAMAGE IS BELOW WHERE THE DRUM GEAR IS ON THIS DESIGN, THE WINCH HAS AN AREA WHERE IT CATCHES, SORT OF, YOU HAVE TO USE A LITTLE MORE FORCE TO GET IT PAST THAT POINT, IF YOU ARE IN THE SLOWER 2ND GEAR DIRECTION IT DOESN'T HESITATE. I HAVE STRAIGHTENED THE ALUMINUM DAMAGED CRACKED AREA, AND HAVE SEVERAL WRAPS OF MYLAR EXTERIOR CAR TAPE IN A GLOSSY BLACK FINISH ON THE BASE TO COVER THE DAMAGED AREAS. (SEE LAST PHOTOS) THERE ARE ALSO A FEW DENTS, PAINT CHIPS BUT ALL IN ALL, A GOOD LOOKING WINCH.
  • Manufacturer Part Number: WAVE GRIP 42ST WINCH
  • Brand: Lewmar

    Description

    ****SHIPPING COSTS ARE ONLY FOR MAINLAND (LOWER 48) STATES, NOT HAWAII, OR ALASKA OR PR......
    THIS LISTING IS FOR ONE ONLY, LEWMAR 42 ST TWO SPEED WAVEGRIP WINCH WITH AN ALUMINUM BLACK/DARK GREY? ANODIZED DRUM.
    IT'S AN ADDED BONUS THAT THIS IS THE EARLIER DESIGN WHEN THEY USED SOLID CAST ALLOY TOP JAW/CROWN AND THE LOWER JAW IS MOLDED INTO THE TOP OF THE WINCH, NOT PLASTIC THAT IS VERY HARD TO FIND REPLACEMENTS FOR.
    THERE IS DAMAGE TO THE BASE  (A CRACK) THAT IS ON THE LOWER EDGE OF THE BASE, IN AN AREA BELOW THE DRUM GEAR. (READ CONDITION ISSUES)
    THE BASE MEASURES APROX 6 3/8" DIAMETER, AND STANDS APROX 7 1/2" TALL, THE DRUMS MEASURE APROX 3 1/8" DIAMETER, IT HAS  A 2ND SPEED POWER RATIO OF APROX 42:1.
    PLEASE CHECK MY OTHER LISTINGS FOR ADDITIONAL SAILBOAT HARDWARE.